link_1
link_2
link_4
link_5
link_6
 
PRODUCTS
 
ADHESIVE TAPES

ELASTOMERIC TAPES

TAPES, OTHERS
INSULATION FOR MOTOR REWINDING  & OTHERS
SPECIALTY  INSULATIONS
 
Products -Elastomeric Tapes

Autobond 1010 & 1013

Self Amalgamating Tape

Bells has successfully developed within their 'R & D' facility "Self

Amalgamating  Tapes of Anticorrosive as well as insulating values. These

tapes are exclusively designed for use in jointing of telecommunication Cables

laid  underground. These inherent properties of the basic polymer  enables the

said tapes to protect the joint from chemicals or electrolytic corrosion apart

from perfect insulation.

 

Recommeneded Uses

1. Protection from Bird fault over Bus Components, Cross arms, Jumper

    Joints

2. Insulation of damaged cables in emergency condition such as Rain, Snow,

    Etc

3. For Building stress cones

4. For Jacketing of high voltage terminations of power cables from 600 Volts

    through 35000 Volts

5. For Insulation & Jacketing of splices on power cable from 600 Volts

    through 69000 Volts

6. For Protection from corona and ozone attack

7. Weather proofing requirements

 

Method of Application

AUTOBOND-1013 anticorrosive Tape is stretched to 2/3 (two third) of its

original width and then it is wrapped by the half over lapping process. Two

such layers are good enough for proper binding & amalgamation. Over the

said lapped tape in similar way, warp AUTOBOND-1010  Tape with

enough tension which reduces the original width of the tape to 2/3 (two third)

and apply Two layers for proper insulating and Self bonding properties.

Above tapes are compatible with all types of power cables such as PVC,

EPR, XLPE etc.

 

Technical Data
  AUTOBOND-1010 Moisture Proof Tape AUTOBOND-1013 High Voltage Tape
Width mm. 40 19
Thickness mm, MIN 0.75 0.5
T. Strength kg/mm 0.25 0.15
Elongation (%) 600 400
BDV kv/mm 10 20
Fusion No Separation between layers No Separation between layers
Cracking No Crack No Crack
Tackyness  Excellent Excellent
Ozone Resistance Unaffected Unaffected
Electrolytic Corrosion Unaffected Unaffected
Temp. Range -40°C to + 130°C -40°C to + 130°C
U.V Attack Unaffected Unaffected
Water Resistant Unaffected Unaffected

 

Note: Above technical information and recommendation are based on test carried by us as per

ASTM-D 1373 and other available specifications however the user should determine the suitability

before use. Other width, thickness and better insulating values tapes could be supplied on

 demand.